anyang forging hammer|pneumatic forging hammer
jia

pneumatic forging hammer

One piece pneumatic forging hammer

pneumatic forging hammer

Two piece pneumatic forging hammer

Special features of Anyang forging hammers

Pneumatic forging hammer Hammers spare parts

Pneumatic forging hammer Forging dies

C41 series one piece pneumatic forging hammer

pneumatic forging hammer pneumatic forging hammer


Applications :
  This pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forge, welding, bending and twisting. It is also used for forge in bolster dies.

Features of pneumatic forging hammer:
   + Ready operation: economic and convenient
   + Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired   
   + A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.

  The main technical parameter of one piece pneumatic forging hammer :

 
Model C41-9 C41-15

C41-25

C41-40

 C41-55

C41-75
Weight of falling parts (kg) 9 15 25 40 55 75
Maximum hit energy(kj) 0.09 0.16 027 0.53 0.7 1
Diameter of the working cylinder(mm) 100 115 165 200 215 210
Diameter of the compressing cylinder(mm) 105 125 170 205 220 240
Hit number (min-1) 245 245 250 245 230 210
Height of working area (mm) 135 160 240 230 270 300
Tup axis to frame front (mm) 120 140 200 235 270 280
Dimension of top die surface(L x W) (mm) 60x35 70x40 100x50 116x53 135x60 145x65
Dimension of bottom die surface(L x W)(mm) 60x35 70x40 100x50 116x53 135x60 145x65
Maximum round steel can be forged(Diameter)(mm) 30 35 48 68 75 85
Maximum square steel can be forged(mm) 25x25 30x30 40x40 52x52 60x60 65x65
Distance from bottom die surface to base(mm) 325 370 410 500 610 750
Machine floor space(L x W)(mm) 790x550 850x500 1320x610 1265x1470 1435x1650 1430x1478
Machine height (above the ground) (mm) 950 980 1300 1390 1590 1853
  Motor Type Y90L-4 Y100L-4 Y112M-6 Y132MI-6 Y132M2-6 Y160M-6
Rate power(kw) 1.5 2.2 3 4 5.5 7.5
Speed(r/min-1) 1400 1400 970 960 960 970
Total weight of the hammer (kg) 250 290 720 860 1300 2500

 
C41 series two pieces pneumatic forging hammer
pneumatic forging hammer


Applications :
   This pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forging, welding, bending and twisting. It is also used for forging in bolster dies.

Features:
   + Ready operation: economic and convenient
   + Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired   
   + A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.

 

The main technical parameter two pieces pneumatic forging hammer :
Model C41-150 C41-250 C41-400 C41-560 C41-750 C41-1000 C41-2000
Weight of falling parts (kg) ) 150 250 400 560 750 1000 2000
Maximum hit energy(kj) 2.5 5.6 9.5 13.7 19 27 54

Hit number(min-1)

 180 140 120 115 105 95 80
Heigh of working area (mm) 370 450 530 600 670 800 1000
Tup axis to frame front (mm) 350 420 520 550 750 770 950
Dimension of top die surface(L x W) (mm) 200x85 220x100 250x120 300x140 330x160 365x180 400x300
Dimension of bottom die surface(L x W) (mm) 200x85 220x100 250x120 300x140 330x160 365x180 400x300
Forges Square(mmxmm） 130x130 145x145 220x220 270x270 270x270 290x290 350x350
Round(mm) Φ145 Φ175 Φ240 Φ280 Φ300 Φ320 Φ400
Motor Type Y180M-4-B3 Y180L-4-B3 Y200L-4-B3 Y280S-6-B3 Y280M-6-B3 Y315S-6-B3 Y315L2-6-B3
Power(kw) 18.5 22 30 45 55 75 132
Weight Hammer(kg) 3260 5000 8000 9800 17000 20000 48000
Anvil block(kg) 1500 2500 4800 6720 9000 13000 24000
Outside Size

2390x

1085x

2150

2639x

1155x

2540

2785x

1400x

2884

3464x

1500x

3157

3905x

1370x

3175

4125x

1500x

3770

4200x

2300x

4390

 

© Copyright by Anyang forging press. Add:Changjiang Road,High-tech Zone,Anyang City, Henan P.R. ,China
Tel: 0086-372-5986767,5986768,5931234 Fax: 0086-372-5922446

E-mail: anyang@chinesehammers.com
chinahammers@163.com
chinesehammer@163.com